How To Fix Machine-Woven Cane On Chairs
Chairs made from cane are exquisite accents for any interior. Maybe you have a cane seat rocking chair in your baby's nursery, or a cane woven love seat in your sun porch, emphasized by tropical wall art and fish wall hangings.
If you need to fix a hand-caned chair, you should take it to a professional craftsman. Fortunately, you can repair machine-woven caning issues including sagging cane or a seat replacement.
But your machine-woven cane seating can effortlessly be fixed at home, whether the trouble is a drooping seat or if you need to exchange the seat entirely. An easily replaceable slat bonds machine-woven cane together. To fix a slack chair, you can usually take on repairs without replacing the caning or removing the slat. Here is some information to help you decide what type of mend your cane chair requires in order to make it as good as new.
Seat is Sagging
A cane chair will droop with persistent use, especially if the chair happens to be wet. But don't worry; this is a simple fix. When mending a sagging cane chair, the initial thing you want to do is turn the chair over. Then you will have to rub down the caning of the chair with a damp cloth, taking caution to avoid getting the frame wet. Let the cane dry for a minimal of 24 hours, so the material can contract. Prevent the seat from sagging in the future by misting it with water once each thirty days and allowing it to dry before use. This also forbids the cane from cracking and drying out.
Whole Seat Replacement
Similar to window screen, the cane that is found in machine-woven seating is connected to the frame with spline. It can also be exchanged if need be. Find a rut on the chair's frame that is filled with wood slat. In order to repair the seat, you want to take out the slat and replace it.
Make certain you have plenty of cane to make the mend. You will want enough to cover the seat with an margin of two or more inches on either side. You can purchase sheets of cane at any wood or major craft store; they come in sheets 12 and 24 inches wide. In addition to the cane, you will require caning spline, a mallet, utility knife, wedges, flathead screwdriver, pair of scissors, wood glue, fine-grit sandpaper, and measuring tape. You should also have a sink closeby or a tub of warm water with a large rag or towel.
First, you want to measure the seat of your chair and cut the wicker so it will have two inches of surplus on each side. Place the cut cane in the tub of warm water for around forty-five minutes; this makes the cane easier to work with and more flexible. While you are waiting for the new wicker, get rid of the old material. You will require the flathead screwdriver to pry up the spline. If you are having difficulty removing it, then utilize the utility knife to cut around the edges and prize it loose. Be sure that all adhesive and dirt is taken from the grooves of the chair as well.
* After the cane is finished soaking, remove it from the water and use your towel to pat it dry. Position the cane over the seat and use a wedge and hammer to tap it into the groove in the chair. Pull the caning tight but be careful not to distort the caning. Applying the wedge, tape the other side. Place wedges around the entire chair frame.
* After you have positioned wedges all about the chair, take them out one at a time. While taking away each individual wedge, glue the new slat into the seat. The wedge and hammer can be utilized, if need be, to help put the spline into the rut. After you have taken the wedges out and put in the slat, cut the spline to fit and fit the last section in. Allow the paste to dry before shaving off any surplus material and glue using the blade. Sand paper can be employed to sand the area. A vacuum cleaner will get rid of all the dust. And finally, put on a new coat of spray varnish to your fresh cane chair.
If you need to fix a hand-caned chair, you should take it to a professional craftsman. Fortunately, you can repair machine-woven caning issues including sagging cane or a seat replacement.
But your machine-woven cane seating can effortlessly be fixed at home, whether the trouble is a drooping seat or if you need to exchange the seat entirely. An easily replaceable slat bonds machine-woven cane together. To fix a slack chair, you can usually take on repairs without replacing the caning or removing the slat. Here is some information to help you decide what type of mend your cane chair requires in order to make it as good as new.
Seat is Sagging
A cane chair will droop with persistent use, especially if the chair happens to be wet. But don't worry; this is a simple fix. When mending a sagging cane chair, the initial thing you want to do is turn the chair over. Then you will have to rub down the caning of the chair with a damp cloth, taking caution to avoid getting the frame wet. Let the cane dry for a minimal of 24 hours, so the material can contract. Prevent the seat from sagging in the future by misting it with water once each thirty days and allowing it to dry before use. This also forbids the cane from cracking and drying out.
Whole Seat Replacement
Similar to window screen, the cane that is found in machine-woven seating is connected to the frame with spline. It can also be exchanged if need be. Find a rut on the chair's frame that is filled with wood slat. In order to repair the seat, you want to take out the slat and replace it.
Make certain you have plenty of cane to make the mend. You will want enough to cover the seat with an margin of two or more inches on either side. You can purchase sheets of cane at any wood or major craft store; they come in sheets 12 and 24 inches wide. In addition to the cane, you will require caning spline, a mallet, utility knife, wedges, flathead screwdriver, pair of scissors, wood glue, fine-grit sandpaper, and measuring tape. You should also have a sink closeby or a tub of warm water with a large rag or towel.
First, you want to measure the seat of your chair and cut the wicker so it will have two inches of surplus on each side. Place the cut cane in the tub of warm water for around forty-five minutes; this makes the cane easier to work with and more flexible. While you are waiting for the new wicker, get rid of the old material. You will require the flathead screwdriver to pry up the spline. If you are having difficulty removing it, then utilize the utility knife to cut around the edges and prize it loose. Be sure that all adhesive and dirt is taken from the grooves of the chair as well.
* After the cane is finished soaking, remove it from the water and use your towel to pat it dry. Position the cane over the seat and use a wedge and hammer to tap it into the groove in the chair. Pull the caning tight but be careful not to distort the caning. Applying the wedge, tape the other side. Place wedges around the entire chair frame.
* After you have positioned wedges all about the chair, take them out one at a time. While taking away each individual wedge, glue the new slat into the seat. The wedge and hammer can be utilized, if need be, to help put the spline into the rut. After you have taken the wedges out and put in the slat, cut the spline to fit and fit the last section in. Allow the paste to dry before shaving off any surplus material and glue using the blade. Sand paper can be employed to sand the area. A vacuum cleaner will get rid of all the dust. And finally, put on a new coat of spray varnish to your fresh cane chair.
Source...