Closet Rod Installation
- 1). Use a stud finder to locate studs on each side of where the rod will be installed. Mark this location.
- 2). Mark drilling holes for the two end brackets so that the holes are drilled into studs.
- 3). Attach the brackets to the studs with the provided screws.
- 4). Cut the rod to size using a saw. Skip this step if the rod is adjustable.
- 5). Slide one end of the rod into the closed-circle bracket.
- 6). Snap the other end down into the open-ended bracket.
- 7). Place the cap over the open-ended bracket if one was provided.
Source...