How to Relamp the Turn Signal/Parking Headlight on a 2002 Jeep Grand Cherokee
- 1). Turn off the Jeep Grand Cherokee's engine and open the hood of the vehicle.
- 2). Use the screwdriver to remove the screw located at the top of the headlight unit.
- 3). Remove the headlamp assembly from the vehicle by pulling it away from the engine. Remove all of the sockets from the headlamp assembly unit by pulling on them. Disconnect the electrical connector from the headlamp assembly by unplugging it from the back of the unit.
- 4). Remove the bulbs you wish to replace by pulling them from out of the headlamp assembly unit. Install the new bulbs by pushing them into place. Reinstall all of the sockets and reconnect the electrical connector.
- 5). Attach the headlamp unit to the vehicle by pushing it back into place and reattaching the screw found at the top of the headlamp unit. Close the hood.
Source...