How to Install Memphis Speakers
- 1). Remove a 1/2 inch of insulation with a set of wire strippers from the ends of the speaker wire leads that attach to the Memphis speaker.
- 2). Slide the cylindrical end of a slide terminal over the bare end of the positive speaker wire lead. This speaker wire lead will be red or marked with a set of "+" marks. Place the jaws of a crimp tool over the slide terminal and crimp the cylinder onto the bare wire.
- 3). Slide the cylindrical end of a slide terminal over the bare end of the negative speaker wire lead. This speaker wire lead will be black or marked with a set of "-" marks. Place the jaws of a crimp tool over the slide terminal and crimp the cylinder onto the bare wire.
- 4). Push the slide terminal on the positive speaker wire lead onto the positive speaker terminal tab on the rear of the speaker. This tab is marked with a "+" mark. Push the slide terminal on the positive speaker wire lead onto the negative speaker terminal tab on the rear of the speaker. This tab is marked with a "-" mark.
- 5). Place the speaker into the speaker mounting opening in your car and secure with the screws provided with the speaker.
Source...