Removal

• 1). Raise the vehicle and support it with jack stands placed under the frame or axle.
  
  
• 2). Remove the wheel and tire.
  
  
• 3). Remove the brake drum by pulling it off the lug-nut studs.
  
  
• 4). Use a lug-nut stud removal tool (T74P-3044-A1) to press the stud from its hole in the hub.
  
  

Installation

• 1). Examine the stud hole in the hub. There will be groves left by the old stud.
  
  
• 2). Insert the new lug stud into the hole. Align the grooves on the base of the stud with the grooves in the hole.
  
  
• 3). Place four flat washers over the stud.
  
  
• 4). Thread a lug nut onto the new stud.
  
  
• 5). Tighten the lug nut until the new stud is completely seated in the hole.
  
  
• 6). Reinstall the wheel and tire.
  
  
• 7). Lower the vehicle.