How do I Troubleshoot a Hot Tub Air Jet Pneumatic Control?
- 1). Push the blower button to turn off the blower. Your hot air pool will have a "standard keypad" display on its the upper deck.
- 2). Wait until the motor stops running, and then unplug the air pool from its electrical power source.
- 3). Remove kinks and bends from the air hose by straightening it out.
- 4). Secure the air "line-to-motor" connection and "motor-to-on/off" button under the unit's deck.
- 5). Verify that the jets are open. If closed, rotate the jets counterclockwise to allow water to flow through.
- 6). Check the ground-fault circuit connector (GFCI) circuit breaker reset button and verify that it is depressed. If so, press it to restore power; if it is not depressed and the power turned off without your intervention, contact an electrician. A live circuit may cause an electrical shock.
Source...