How to Glue on a Vane
- 1). Clean the surface on which you plan to glue the weather vane. Use a power washer to remove any dirt that's accumulated on the outdoor surface. Wipe the bottom of the weather vane with a wet cloth to remove dust. Allow both surfaces to dry.
- 2). Cover the bottom of the weather vane with urethane glue. Use a glue roller for best results. Avoid over-application, as excess glue can ooze out once the vane is applied to the surface.
- 3). Line the weather vane up with your desired location and press it down hard onto the surface.
- 4). Allow approximately 24 hours for the glue to set and dry.
Source...