Installing a JVC Head Unit in Your New Car
New clients oftentimes ask how they can properly install a JVC head unit that they just bought online.
A lot of them are very excited about installing them and showing them off to friends and loved ones.
Installing a JVC car stereo is quite easy and simple.
Most JVC products are very user friendly and installing them is not at all that hard to do.
Their products are very well adapted to most car audio sound systems and most of the time they can be easily adapted to new components as well as the older ones.
Before you start installing the JVC car stereo, make sure that you unhook the battery first and make sure that all your tools are prepared.
You will need to unscrew the old head unit that is located in the dash from the metal housing.
The car stereo will easily slide out once you have unscrewed it from the metal housing.
Before you go and pull it out, make sure that you slowly unhook the old component from its wirings from the back.
Try as much as you can to remember which wire went into which socket and try not to lose some of them.
You might get confused later on if you were able to plug them correctly but lost a wire or two.
Take care not to lose the screws as well, you wouldn't want your new unit to keep on smashing against the frame.
You will need to secure your JVC in car audio system on the metal housing afterward.
As soon as you have removed your old head unit, reattach your new JVC head unit at the back with the wirings.
You may want to see if the new model you bought has adapters included in the package.
As soon as your new unit is attached, partially insert the unit into the dash and turn on the battery and test out your new model if it functions properly and if it is not, readjust accordingly.
Having read the user manual would be a very great advantage at this point since it will help you a lot.
As soon as your system is functioning properly and the sounds are up to your standards, you can then proceed to putting it into the dash properly.
Screw the unit properly and make sure that the unit is inserted properly into the dash.
You may at this point use safety screws, these will help you secure it and avoid its theft.
As soon as it is secured, you will have to turn the whole system on and tweak the audio until you have achieved the best results.
A lot of them are very excited about installing them and showing them off to friends and loved ones.
Installing a JVC car stereo is quite easy and simple.
Most JVC products are very user friendly and installing them is not at all that hard to do.
Their products are very well adapted to most car audio sound systems and most of the time they can be easily adapted to new components as well as the older ones.
Before you start installing the JVC car stereo, make sure that you unhook the battery first and make sure that all your tools are prepared.
You will need to unscrew the old head unit that is located in the dash from the metal housing.
The car stereo will easily slide out once you have unscrewed it from the metal housing.
Before you go and pull it out, make sure that you slowly unhook the old component from its wirings from the back.
Try as much as you can to remember which wire went into which socket and try not to lose some of them.
You might get confused later on if you were able to plug them correctly but lost a wire or two.
Take care not to lose the screws as well, you wouldn't want your new unit to keep on smashing against the frame.
You will need to secure your JVC in car audio system on the metal housing afterward.
As soon as you have removed your old head unit, reattach your new JVC head unit at the back with the wirings.
You may want to see if the new model you bought has adapters included in the package.
As soon as your new unit is attached, partially insert the unit into the dash and turn on the battery and test out your new model if it functions properly and if it is not, readjust accordingly.
Having read the user manual would be a very great advantage at this point since it will help you a lot.
As soon as your system is functioning properly and the sounds are up to your standards, you can then proceed to putting it into the dash properly.
Screw the unit properly and make sure that the unit is inserted properly into the dash.
You may at this point use safety screws, these will help you secure it and avoid its theft.
As soon as it is secured, you will have to turn the whole system on and tweak the audio until you have achieved the best results.
Source...