How to Remove the Maytag GA608 Washer Agitator
- 1). Unplug the washer from the wall or turn off the power to the circuit to which the washer is attached.
- 2). Open the washer hood.
- 3). Examine the top of the agitator to locate the thin line where the agitator cap meets the agitator. Gently press the edge of a flat bladed screwdriver blade between the cap and the agitator until the cap pops up and off.
- 4). Remove the fabric softener compartment at the top of the agitator by pulling it straight up and off.
- 5). Use a socket wrench to loosen the agitator bolt by turning it counterclockwise. Remove the bolt.
- 6). Place both hands underneath the agitator. Position your head to the side, away from the tub opening--this will help prevent accidents if the agitator comes off suddenly. Pull up on the agitator to remove it.
Source...