The elevator is a special capacity - load device of the car along the vertical rail constant between the different water level, do the intermittent movement of electrically driven lifting appliances.

    Customary, regardless of their drive way, the general term of the elevator as the vertical means of transport within the building.

    In recent years, with the international community to focus on environmental awareness, the major elevator company in its elevator surface are basically using powder coating, which is a new environmentally friendly solvent-free paint, and a variety of performance are better than paint .

Function

   Hyundai Elevator is the composition of the traction machine (winch), rail, weighing devices, safety devices (such as the governor, safety gear and buffers, etc.), the signal control system, car and landing doors. These sections were installed in the hoistway and machine room of the building. Commonly used wire rope friction drive, the wire rope around the sheave, and both ends are connected to the car and balance weight, motor-driven traction wheels make the car lift. The elevator requires a secure and reliable transmission efficiency, and accurate leveling and ride comfort. The basic parameters of the elevator rated load capacity, can take the number of rated speed, the car outside dimensions and shaft type and so on. Simple to use (emergencies following solution)

    Manned elevators are intelligent computer control, automation equipment, does not require specialized personnel to operate

   Elevator lift chart lift the internal structure of Figure

   Driving ordinary passengers to ride and operate a lift according to the following procedures.

  1. Floor elevators at the entrance by ladder, according to the need for upstream or downstream, on the direction of or under the direction of the arrow buttons, as long as the button on the lights, it means your call has been recorded, just waiting for the elevator to the arrival of.

   2. Elevator to reach the door, let the car staff out of the elevator, then call the ladder into the elevator car. To enter the car, you need to reach the floor, press the corresponding number button on the operation panel in the car. Similarly, as long as the button lights, then your layer selection has been recorded; without conducting any other operation, as long as the elevator to reach your goal layer docked to.

   3. Elevator travel to your target layer will automatically open the door, out of the elevator, in order to end one by ladder.