Hitachi N5010A: Staple With Ease When Using This Professional Crown Stapler
If you are looking for an industrial design pneumatic stapler then look at the Hitachi N5010A.
Hitachi knows what it means to be crawling around on a roof trying to get everything stapled down while still meeting your deadlines.
There will be no reason for the arm to get tired while carrying this stapler around since it weighs a whooping 5 lbs.
There are no special oversized staples that will need to be purchased in order to operate the Hitachi N5010A.
Any standard size staple will do the job as long as it is ½ inch and is no longer then 2 inches.
That means they can be picked up anywhere and you will not waste hours trying to find some.
If you are a contractor then you know first hand how rough the jobs are on your tools.
There is nothing worse then sinking money into a power tool that does not outlast numerous jobs.
That is why Hitachi made this tool out of plating that is stainless steel.
That means it will not only last on this job but numerous more down the road.
When climbing around on a roof it is important to have a tool that is quick, easy to handle, and will not weigh you down.
At only 5 lbs the weight is not going to be an issue for using all day long.
This lightweight stapler is going to pump out 13 staples every second.
The question is will you be able to keep up with it? At a rate that quick there is no reason one will not be able to make some good time while utilizing it.
When you are gripping it your hand will be comfortable holding onto the grip made out of elastomer.
What about jamming and reloading? Usually when reloading a stable there is a lot of flubbing around trying to get the staples loaded.
With the magazine open head design no only will the staples go in with a quickness and ease but, you will always be aware of how soon before reloading.
The staples can actually be seen on the top of the stapler so there is no more guessing how soon before they are all 150 are used up.
If for some reason a staple gets jammed in the Hitachi N5010A just hit the jam release so you can continue working.
Since all workers need to be safe from anything flying into their eyes there will be a pair of safety glasses included with the stapler.
Even though there is no special tools that will have to be carried around there will be a hex bar wrench included that you might want to keep with you when using the stapler.
So.
the next time you are tired of staples jamming and it seems like you are spending more time jacking with your stapler instead of using it toss it out.
The Hitachi N5010A has your back and will not leave you disappointed.
From the lightweight, easy reloading, open magazine, to the jam release every job will be a breeze from start to finish!
Hitachi knows what it means to be crawling around on a roof trying to get everything stapled down while still meeting your deadlines.
There will be no reason for the arm to get tired while carrying this stapler around since it weighs a whooping 5 lbs.
There are no special oversized staples that will need to be purchased in order to operate the Hitachi N5010A.
Any standard size staple will do the job as long as it is ½ inch and is no longer then 2 inches.
That means they can be picked up anywhere and you will not waste hours trying to find some.
If you are a contractor then you know first hand how rough the jobs are on your tools.
There is nothing worse then sinking money into a power tool that does not outlast numerous jobs.
That is why Hitachi made this tool out of plating that is stainless steel.
That means it will not only last on this job but numerous more down the road.
When climbing around on a roof it is important to have a tool that is quick, easy to handle, and will not weigh you down.
At only 5 lbs the weight is not going to be an issue for using all day long.
This lightweight stapler is going to pump out 13 staples every second.
The question is will you be able to keep up with it? At a rate that quick there is no reason one will not be able to make some good time while utilizing it.
When you are gripping it your hand will be comfortable holding onto the grip made out of elastomer.
What about jamming and reloading? Usually when reloading a stable there is a lot of flubbing around trying to get the staples loaded.
With the magazine open head design no only will the staples go in with a quickness and ease but, you will always be aware of how soon before reloading.
The staples can actually be seen on the top of the stapler so there is no more guessing how soon before they are all 150 are used up.
If for some reason a staple gets jammed in the Hitachi N5010A just hit the jam release so you can continue working.
Since all workers need to be safe from anything flying into their eyes there will be a pair of safety glasses included with the stapler.
Even though there is no special tools that will have to be carried around there will be a hex bar wrench included that you might want to keep with you when using the stapler.
So.
the next time you are tired of staples jamming and it seems like you are spending more time jacking with your stapler instead of using it toss it out.
The Hitachi N5010A has your back and will not leave you disappointed.
From the lightweight, easy reloading, open magazine, to the jam release every job will be a breeze from start to finish!
Source...