How to Access Heat Elements in a Kenmore Dryer 90 Series
- 1). Unplug the dryer from your wall. Do this to prevent shocking yourself.
- 2). Locate the lower panel seam on the dryer's front side below the door. Put your putty knife in the seam about 2 inches from the left and push upward. You should hear a click from the retaining clip as it detaches one side of the panel. Repeat the process on the other end to completely detach the lower panel.
- 3). Pull the panel down. The rectangular box on the right-hand side is the heating element case.
Source...