Power Factor Correction - How to Reduce Energy Consumption and Save Money on Your Electricity Bills
Power factor correction, simplified, is a correction of harmonic in-balance of electrical power supplies created by use of electrical equipment with windings and some electronic equipment.
Sounds simple enough huh? Here's a better way at looking at it...
Our typical clients are Shopping Centre's, Body Corporations, Production Farms, Hotels, and Large Corporate firms.
Occasionally domestic homes are now starting introduce this concept to large homes consuming a decent amount of electricity.
They tend to have the challenge of producing the most electricity on the street and therein lay an extra large electricity bill every quarter.
So to counteract that, we have almost halved the Kw run cost on some sites (Yes, halved).
Unfortunately it is inevitable that electricity consumption costs will continue to rise in the years to come.
Now fortunately, the approximate pay back on supply and installation of this equipment, depending on site, can be approximately 3 to 5 years.
That's when the real fun begins, because when everyone else is still using the same amount of electricity, you have decreased it substantially and therefore decreased your overheads, and in turn increased your income (Money out of thin air...
) Essentially, a leasing agreement for power factor correction installation can be setup for the same cost as you pay now.
In a few years time, you then have paid for the total investment and have reduced your overheads more than ever before.
You in hand have become half of your own electricity company, well done.
General Equipment: Electric motors, Refrigeration equipment, Diochrolic 12v down lights, Transformers, Heating elements, Metal arc hi-bay lighting etc..
Power factor correction units are normally installed near in the main switchboard room of premises being nice and tidy and fully integrated.
To calculate what size Kvar and type of equipment is the best possible solution, a very quick and simple preliminary site inspection supply test of switchboard is required.
Once determined, we now know what equipment is needed to reduce your Kw input.
Logically, we'd all like to pay the very least amount of electricity when the bills arrive, this is the most effective way to do exactly that', and we've mastered the application in general to produce the very best results back to the owner or occupier.
Are you switched on, yet? Forget the Lotto.
Create your own winnings out of thin air and get started today.
Most folks and companies don't know how easy the process and structure of power factor correction is, so for a free consultation and proposal, see below:
Sounds simple enough huh? Here's a better way at looking at it...
Our typical clients are Shopping Centre's, Body Corporations, Production Farms, Hotels, and Large Corporate firms.
Occasionally domestic homes are now starting introduce this concept to large homes consuming a decent amount of electricity.
They tend to have the challenge of producing the most electricity on the street and therein lay an extra large electricity bill every quarter.
So to counteract that, we have almost halved the Kw run cost on some sites (Yes, halved).
Unfortunately it is inevitable that electricity consumption costs will continue to rise in the years to come.
Now fortunately, the approximate pay back on supply and installation of this equipment, depending on site, can be approximately 3 to 5 years.
That's when the real fun begins, because when everyone else is still using the same amount of electricity, you have decreased it substantially and therefore decreased your overheads, and in turn increased your income (Money out of thin air...
) Essentially, a leasing agreement for power factor correction installation can be setup for the same cost as you pay now.
In a few years time, you then have paid for the total investment and have reduced your overheads more than ever before.
You in hand have become half of your own electricity company, well done.
General Equipment: Electric motors, Refrigeration equipment, Diochrolic 12v down lights, Transformers, Heating elements, Metal arc hi-bay lighting etc..
Power factor correction units are normally installed near in the main switchboard room of premises being nice and tidy and fully integrated.
To calculate what size Kvar and type of equipment is the best possible solution, a very quick and simple preliminary site inspection supply test of switchboard is required.
Once determined, we now know what equipment is needed to reduce your Kw input.
Logically, we'd all like to pay the very least amount of electricity when the bills arrive, this is the most effective way to do exactly that', and we've mastered the application in general to produce the very best results back to the owner or occupier.
Are you switched on, yet? Forget the Lotto.
Create your own winnings out of thin air and get started today.
Most folks and companies don't know how easy the process and structure of power factor correction is, so for a free consultation and proposal, see below:
Source...