No matter how hard we try on keeping our screwdriver bits in their top form, there will eventually come a time that they will incur damages such as shredding. Most of us would throw away these valuable pieces of our power tools. However, the problem can be easily solved even without having to rely on machine shops or professional servicemen that are expert in this field of work. All you need is some information on how you can repair the bits without having to spend a dollar on the service.

Learning how to repair the screwdriver bits by yourself will be a great help to your project. In fact, it will be an asset to you as you can fix the tools anytime you want without having to break the bank in the process. Make sure that you have the right equipments for the job to help you get the instrument working back in its former condition.

• Remove Bit – first and foremost, you would need to remove the bit from the power tool in order to be able to properly work on the part without causing unnecessary damages on the tool. Be very careful with this process as any improper move will inflict problems on the device. In addition, your safety should always be considered to avoid injuries even while fixing parts of the instrument.
• Clean and Let Dry – as soon as you had disassembled the bit from the tool, get a clean cloth and wipe the piece to remove any small debris such as metal residues or dirt. In case the tool is damp, make sure that you do not leave it that way as it can contribute to the gradual deterioration of the material. This preliminary process will let you get a good look on the various parts of the screwdriver. In case a small damage was spotted, the best thing to do is to make immediate actions to prevent aggravating the problem. 
• File – use a filing tool to sharpen and mold the edges of the screwdriver. Make sure that you are doing it correctly and that the tip is even to ensure even distribution of force while turning the screw.Flat head screwdrivers are a lot easier to fix unlike the Phillips and the torx which requires more perseverance and diligence as they definitely have more corners to file. Repeat the process until you are satisfied with the effect of your work. Do not leave rough areas as these can cause damages on the screw in the long run. In addition, they can get on your skin or on your clothes by accident. In most cases, a steel wool is usually used to leave a glossy finish as well as to eliminate any pointed particles.
• Clean and Test – after you are satisfied with the result, make sure that you run a test in order to check whether the filing process was successful. If not, you can go back to the same method all over again until you get what you want.