How to Change Grote Light Bulbs
- 1). Remove the bezel from the light. If bezel is threaded onto the light housing, turn the bezel counterclockwise to unscrew and remove it, while holding the lens in place. If the bezel is attached by screws, use a screwdriver to remove the screws. Pull the bezel from the light while holding the lens in place.
- 2). Unscrew the three Phillips screws that hold the lens in place. Set the lens aside.
- 3). Snap the existing Grote LED bulb out of the base. Discard the "dead" bulb. Snap the new Grote light bulb into place.
- 4). Hold the lens against the housing. Thread the bezel back onto the housing, if the bezel is threaded. If the bezel is attached by screws, hold the bezel and lens in place, while inserting the screws through the mounting tabs on the bezel, and into the housing. Tighten the screws with the screwdriver.
Source...