How to clean block paving
- 1
A stiff broom will easily clear debris.broom image by L. Shat from Fotolia.com
Brush the block paving with a stiff outdoor broom to remove all debris. It is important to do this thoroughly because any remaining stones and old cement could have an abrasive effect on the paving during the cleaning process. - 2
A deep bucket will help clean a large area.bucket image by Aleksandr Ugorenkov from Fotolia.com
Wash the area with soapy water using a scrub brush to gently remove any stubborn dirt. Rinse the area with clean water. An alternative to washing by hand is to use a power washer. This is not required unless the block paving has been seriously neglected. However, it is easier than hand washing, particularly if there is a large area to be cleaned. Hold the lance of the power washer at an angle that will disturb as little of the sand between the paving joints as possible, and at a minimum distance of 8 inches from the surface of the ground. - 3
Work out where to start so that the dirty water drains away.Drain image by Hedgehog from Fotolia.com
Start washing in a corner higher than the spot where the water will run off to (typically a drain). You don't want to have dirty water spreading onto your freshly cleaned area. Work across the paving. If using a power washer, keeping a tight hold of it, taking care not to splash dirt onto any windows or doors. - 4
Refill any sand that was washed away during the cleaning.sand image by kw-on from Fotolia.com
Fill between the paving blocks with sand to replace any that was lost during the cleaning process, once the paving blocks are completely dry. Sand can be bought from your local garden centre. - 5
Cement will maintain the structure of the block paving.cement background #2 image by Adam Borkowski from Fotolia.com
Use cement to re-point any sections that have loosened during the cleaning process. This is more likely to happen during power washing rather than hand washing. - 6
Removing weeds from block paving helps keep it clean.purple weeds image by Andrew Kazmierski from Fotolia.com
Apply a weed killer periodically during the warmer months of the year. An organic and nontoxic solution is safe to use around children and pets. Apply it on a dry day for maximum effect; on a rainy day, you run the risk of washing the weed killer off and spreading it to your lawn, other plants and flowers. If there is already extensive weed growth between the paving joints, remove as many of them as you can before applying the treatment.
Source...