How to Install a Battery on the Dodge Viper GTS
- 1). Turn off the ignition and any accessories. Open the trunk.
- 2). Remove the screws securing the black plastic cover over the battery compartment inside the trunk on the driver's side with a Phillips screwdriver. Lift the cover off and set it aside.
- 3). Remove the negative cable with a wrench. Repeat this process for the positive cable. Loosen the retaining bolt on the retaining strap over the battery with a wrench. Remove the strap and set it aside.
- 4). Lift the battery out of the tray. Clean out any debris in the battery tray and then insert the new battery. Replace the retaining strap and tighten the bolt with a wrench. Attach the positive battery cable. Tighten it with a wrench. Attach and tighten the negative battery cable.
- 5). Replace the battery compartment cover and tighten the screws to secure the cover over the battery.
Source...