How to Replace a Kenmore Elite Agitator
- 1). Unplug the Kenmore Elite washing machine from the wall outlet.
- 2). Pull the dispenser cup off of the top of the agitator shaft. If the dispenser has a lock ring on the bottom of it, lift the lock ring while removing.
- 3). Use a flat-head screwdriver to pry the agitator cap off of the top of the agitator.
- 4). Remove the dust cap from inside the agitator, if your agitator has one.
- 5). Remove the agitator bolt from inside the agitator, using the socket wrench and extension.
- 6). Lift the agitator out of the washing machine and discard it.
- 7). Place the new agitator on the drive shaft, then secure it using the agitator bolt.
- 8). Replace the dust cap, if it was originally installed.
- 9). Place the agitator cap back onto the agitator, then press it down to lock it into position.
- 10
Replace the dispenser cup and close the washer lid. Restore power to the washer.
Source...